Cut Planner app support

Choose Linear or Sheet, select a material and size, then enter the stock dimensions, finished cut sizes, and quantities. Add each different material separately in the same job. Set the actual blade kerf before generating the complete job.

Use the measurement keypad to enter mixed fractions such as 42 1/2. Use Settings to select fractional inches, feet and inches, decimal inches or feet, or metric units.

Name your job in Plan, then choose Save job on Plan or in the Share menu. Reopen it from Saved. Save again after editing to update the same job.

A full app restart starts a blank working job. Your explicitly saved jobs, presets, stock, and settings remain. Returning from the background should preserve the current working job.

Generate a plan to share its PDF or CSV, or print it from the Share menu. Export a backup to Files to keep a separate copy or move your data. Use Import backup to restore a compatible backup. App backups and website backups can differ by version; retain your original copy.

Enable rotation for pieces that can turn; leave it off when grain or material direction matters. Equal splitting divides long runs into matching pieces along their length. The optional oversized-sheet allowance should only be used when your measured sheet has that extra usable material.

Match saved stock to the material name. Set your reusable-drop threshold to the smallest offcut you want to keep. Kerf is the width removed by your blade; end trim reserves material at both ends of linear stock.

Optimization searches are bounded and do not guarantee the absolute minimum waste or cost. Check actual dimensions, defects, grain direction, and project support before cutting.